Product Description:

The MDD093D-N-020-N2L-110GB0 is a synchronous servo motor from Bosch Rexroth Indramat in the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where commanded current is converted into controlled rotary motion for positioning and speed-regulated tasks in automated equipment. This arrangement lets the drive regulate torque and rotor position in real time during indexing, feeding, and repeated start-stop cycles. In production machinery, that supports consistent motion behavior during acceleration, deceleration, and dwell periods without requiring a separate feedback device outside the motor housing.

The motor can deliver a continuous standstill torque of 24.0 Nm, allowing the axis to hold load at zero speed without excessive heating under rated conditions. Its rated speed is 2000 rpm, which suits applications that need moderate shaft speed with stable servo response. A centering diameter of 110 mm helps align the housing with the machine interface, and the electrical connection is arranged on side B for rear cable routing. A plug-type connector simplifies connection to compatible cables, while integrated digital servo feedback supplies rotor position data for closed-loop control. This feedback arrangement allows the controller to monitor motion continuously during both movement and standstill.

The motor is supplied without a blocking brake, so any holding function during power-off periods must come from the machine or the drive. Torque is transmitted through a plain shaft, which is suited to couplings or pulleys that do not require a keyed output. The 093 frame size places the motor in the matching housing class within the series, and a shaft seal helps limit dust and splash from reaching the bearing area. With no rear shaft extension, the housing remains suited to single-ended drive arrangements such as inline gearboxes or belt-driven axes. This layout keeps the output end straightforward and avoids adding extra rotating parts at the non-drive side.