MDD093D-N-020-N2L-110GA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
26 Seconds
The Bosch Rexroth Indramat MDD093D-N-020-N2L-110GA2 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It delivers a continuous torque at standstill of 24.0 Nm and has a nominal speed of 2000 per minute. The motor is fitted with digital servo feedback, includes a plain shaft with seal, and features a holding brake with 22 Nm torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-020-N2L-110GA2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is classified as a motor for digital drive controllers and is installed wherever precise closed-loop positioning or velocity control is required in automated machinery. By pairing with compatible drive electronics, the unit converts commanded current into controlled rotary motion and supplies constant torque across its rated speed range for axes such as gantry drives, handling modules, and packaging equipment.
The motor can deliver a continuous standstill torque of 24.0 Nm, allowing it to hold static loads without overheating when stopped. For power-off safety and vertical axes, the integrated blocking brake produces 22 Nm of mechanical holding torque. Under rated electrical excitation, the rotor reaches a nominal speed of 2000 rpm, matching drive controllers that supply the required synchronizing frequency for this operating speed. Accurate alignment during mounting is aided by a centering diameter of 110 mm, while rotor position and velocity are reported through the built-in digital servo feedback (DSF) interface for high-resolution control loops. Additional characteristics in this model include standard dynamic balancing, a D-length housing, and size code 093 to match the mechanical envelope of this frame size.
Cabling exits on side A, so power and feedback connections face the driven machine rather than the motor rear. The single plug-in connector arrangement reduces wiring errors and shortens installation time. A smooth plain shaft, supplied without a side B extension, transmits torque through friction-fit couplings or clamping hubs. Contaminant ingress at the shaft interface is limited by the fitted with a shaft seal, supporting reliable service in environments where dust or coolant spray is present. The motor also carries a standard housing and plain balancing configuration, ensuring compatibility with common mounting fixtures and load conditions.
Frequently Asked Questions about MDD093D-N-020-N2L-110GA2:
Q: Does the MDD093D-N-020-N2L-110GA2 motor come with a holding brake and what is its torque?
A: The MDD093D-N-020-N2L-110GA2 motor includes a blocking holding brake with a torque of 22 Nm.
Q: What type of motor feedback does the MDD093D-N-020-N2L-110GA2 provide?
A: This model features digital servo feedback (DSF) for precise motor control.
Q: What is the shaft type and does the MDD093D-N-020-N2L-110GA2 include a shaft seal?
A: The shaft on this motor is a plain shaft and includes a shaft seal for better protection.
Q: What is the continuous standstill torque of the MDD093D-N-020-N2L-110GA2 motor?
A: The MDD093D-N-020-N2L-110GA2 provides a continuous torque of 24.0 Nm at standstill.
Q: What is the nominal speed rating for the MDD093D-N-020-N2L-110GA2 synchronous motor?
A: Its nominal speed is rated at 2000 min⁻¹ for standard operation.
