MDD093D-N-020-N2L-110GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
31 Seconds
The Bosch Rexroth Indramat MDD093D-N-020-N2L-110GA1 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. This motor has a nominal speed of 2000 revolutions per minute and a continuous torque at standstill of 24.0 Nm. It features a plain shaft with a shaft seal and includes a holding brake with a torque of 11 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-020-N2L-110GA1 is a synchronous servo motor from Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it delivers controlled rotary motion to axes in industrial automation lines such as gantry stages, transfer stations, and machining spindles. The unit interfaces directly with Indramat power modules to convert commanded current into repeatable torque for coordinated multi-axis movement under CNC or PLC supervision. Its synchronous design allows the connected controller to regulate torque quickly during acceleration, deceleration, and position holding. This makes the motor suitable for axes that must follow programmed motion profiles with consistent response.
The motor uses a centering pilot of 110 mm for accurate alignment in gearheads or machine frames. The end bell is balanced to a standard grade to help reduce vibration during normal operation. Power and feedback conductors exit on side A, and both circuits terminate on a keyed connector for secure cable attachment. This keeps the cable interfaces on one end of the housing and supports orderly routing near the drive side. Under continuous excitation, the motor sustains 24.0 Nm of standstill torque, providing stable holding force without excessive heating. When operated with a compatible controller, it reaches speeds up to 2000 rpm. Velocity and position data are supplied by digital servo feedback (DSF) for closed-loop control.
An integrated blocking brake delivers 11 Nm of holding torque when the drive is disabled, which helps keep a vertical axis from drifting at standstill. The brake provides static holding and is not a substitute for dynamic stopping by the drive. The motor has length code D, indicating a longer active section within the 093 frame. This longer section provides more active material than shorter housings in the same frame size. It uses a plain shaft with a factory-installed shaft seal to support friction-coupled hubs while limiting contamination near the bearing area. The housing is intended for installation inside protected electrical enclosures.
Frequently Asked Questions about MDD093D-N-020-N2L-110GA1:
Q: What is the continuous torque at standstill for the MDD093D-N-020-N2L-110GA1 motor?
A: The MDD093D-N-020-N2L-110GA1 motor provides a continuous torque of 24.0 Nm at standstill.
Q: What type of shaft is included on the MDD093D-N-020-N2L-110GA1 motor?
A: This model features a plain shaft without a shaft end on side B.
Q: Does the MDD093D-N-020-N2L-110GA1 motor include a holding brake?
A: It is equipped with a blocking brake that provides 11 Nm of holding brake torque.
Q: What feedback system does the MDD093D-N-020-N2L-110GA1 use?
A: The MDD093D-N-020-N2L-110GA1 motor uses digital servo feedback (DSF) for motor feedback.
Q: What is the nominal speed of the MDD093D-N-020-N2L-110GA1 synchronous motor?
A: The nominal speed of the MDD093D-N-020-N2L-110GA1 is 2000 min⁻¹.
