Product Description:

The MDD093D-N-015-N2M-130PR2 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for direct coupling with digital drive controllers, the unit delivers regulated motion to indexing tables, conveyors, and packaging axes where repeatable positioning and stable speed control are required. Its standard housing simplifies integration into machine frames while keeping the motor suited to compact automation cells. The design also supports closed-loop operation in applications that need accurate response during starting, stopping, and load changes.

Its performance window includes a continuous torque at standstill of 24.0 Nm, allowing the axis to hold load without overheating when stationary. Under commanded rotation, the rotor reaches a nominal speed of 1500 rpm, which suits production lines that favor high torque over very high rotational speed. Position and multi-turn count are reported by an integrated multi-turn absolute encoder, so the connected drive can recover position data after power cycles without an external homing routine. Power and feedback conductors leave the unit on the right side through a sealed connector, which helps keep wiring within the machine envelope. The motor uses length code D with frame size 093, standard dynamic balancing, and a standard housing that accepts surface cooling airflow from the surrounding cabinet.

The mechanical interface uses a centering diameter of 130 mm and a DIN 5480 shaft profile, so torque is transmitted through a keyway while axial movement is restrained at the coupling. A factory-installed blocking brake provides static holding force of 22 Nm when engaged, which helps secure vertical or overhung loads during power loss. Feedback is issued as digital servo feedback (DSF), allowing compatibility with Rexroth drive controllers that read high-resolution encoder data over a single hybrid cable. A shaft seal is fitted to limit the ingress of cooling oil or dust, and the design omits a side-B shaft extension to keep the overall motor length compact.