Product Description:

The MDD093D-N-015-N2M-130PL2 is an AC synchronous motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It serves as a direct-coupled drive element for digital drive controllers, where it provides precise torque and speed control for automated machine axes, pick-and-place units, and packaging equipment. The motor includes electronic position sensing and a blocking brake, allowing controlled motion during operation and secure holding when power is removed. Its enclosed design suits applications that require accurate axis response without separate external feedback hardware.

The unit reaches a nominal speed of 1500 rpm, enabling low-noise, high-torque motion at moderate shaft speeds. At standstill, it can deliver 24.0 Nm continuously, which helps keep vertical loads or press platens stable without thermal overload. When the brake is engaged, a static holding torque of 22 Nm maintains position during power-off or emergency stop events. Rotor position is tracked by an integrated multiturn absolute encoder, which sends angular data over digital servo feedback channels to the controller. Its multiturn capability allows the drive to retain position information after shutdowns without requiring a homing sequence at restart.

A centering diameter of 130 mm aligns the stator flange to gearboxes or machine plates, and the shaft uses a keyway for torque-locked coupling. Power and feedback conductors exit on the left side through a sealed connector, which helps keep cable routing clear of rotating parts and nearby machine components. Frame size 093 fits the motor’s intended mounting envelope, and the housing uses standard balancing with a shaft seal and a single-ended shaft to support smooth rotation. This layout keeps the rear bearing area free from added overhung load caused by a second shaft end.