Product Description:

The MDD093D-N-015-N2M-130PL1 synchronous servo motor is produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is a permanent-magnet AC motor intended for machine axes operated by digital drive controllers. In automated equipment, the motor converts commanded current into proportional torque for closed-loop position, velocity, and torque control. This arrangement suits continuous-duty use in material handling, packaging, and machining lines that require precise rotary motion.

Its continuous torque at standstill is 24.0 Nm, so the motor can maintain that load without exceeding thermal limits during rated operation. At a nominal speed of 1500 rpm, the motor reaches its rated mechanical output within the normal operating range of the series. A built-in blocking brake provides 11 Nm of holding torque to secure vertical or suspended loads when power is removed. The centering shoulder measures 130 mm, which helps align the motor with compatible machine mounts and reduce radial misalignment. Power and feedback connections exit on the left side of the housing, which can simplify cable routing in space-limited layouts. Position information is carried through digital servo feedback, allowing the drive to process motion data every electrical cycle.

The rotor and coupling surfaces use standard balancing, which supports operation within the intended vibration range. Electrical power reaches the stator windings through a keyed connector that resists accidental disconnection during operation. Motion is transmitted through a solid shaft with a keyway, and a factory-installed shaft seal helps keep coolant or oil from entering the motor. The unit also uses a multiturn absolute encoder for absolute position reporting, and it is built in size 093 with length code D, a standard housing, and no shaft end on side B.