Product Description:

The MDD093D-N-015-N2M-130PB2 is a synchronous servo motor built by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts controlled three-phase power from an inverter into precise rotary motion for axes in packaging machinery, material-handling stations, and machine tools. The unit is intended for closed-loop automation where accurate speed and position control are required for repeatable motion. This arrangement allows the connected drive to regulate acceleration, velocity, and position directly at the motor shaft.

It includes a centering diameter of 130 mm, allowing rigid flange alignment to gearboxes or machine frames. At standstill, the motor can deliver 24.0 Nm of continuous torque, supplying steady force for indexing tables or vertical loads. Its nominal speed is 1500 rpm, which supports stable velocity control in moderate-speed applications. For power-off conditions, the blocking brake supplies up to 22 Nm of static torque so the shaft remains fixed. Power and feedback conductors exit on Side B, keeping wiring at the non-drive end and supporting clean cable routing in compact installations. The output shaft uses a keyway, which supports torque transfer to standard couplings and pulleys.

Standard dynamic balancing limits residual vibration, and the sealed housing resists airborne oil and coolants. Motion precision is achieved through the integrated multiturn absolute encoder, which returns position data as digital servo feedback (DSF) for real-time correction by the drive. Because the encoder is multiturn and absolute, the controller can retain shaft position information across multiple revolutions. A shaft seal protects the internal bearings from contaminants, and the motor has no secondary shaft end. The motor uses length code D, which corresponds to an extended stator stack while keeping the 093 frame size unchanged.