Product Description:

The MDD093D-N-015-N2M-130PA2 is a synchronous motor from Bosch Rexroth Indramat produced within the MDD Synchronous Motors series. Designed for digital drive controllers, it delivers rotary motion in packaging, printing, and general automation equipment. Its permanent-magnet design supports stable torque production across controlled speed ranges, which helps the drive respond quickly to load changes. In automated lines, it is commonly used on feed axes, indexing tables, and rotary handling stations where controlled acceleration and dependable stopping are required. This makes the unit suitable for applications that require repeatable positioning and steady low-speed behavior.

At standstill, the motor can generate a continuous torque of 24.0 Nm, allowing it to hold or slowly index heavy loads without overheating. During routine operation, it is tuned for a nominal speed of 1500 rpm, a moderate rate that suits gear-driven axes and helps protect mechanical transmissions. A blocking brake rated at 22 Nm secures the shaft when the system is de-energized, and rotor position data are delivered over Digital servo feedback (DSF) for closed-loop motion control. This combination supports stable holding at zero speed and accurate tracking during movement. A centering diameter of 130 mm aligns the stator housing to common mounting faces, and the assembly is balanced to a standard grade to reduce vibration when used with couplings.

Electrical and signal leads exit on Side A, and a keyed power Connector supports secure cable attachment. This cable orientation can simplify routing where connectors must stay clear of guards or adjacent axis components. The output shaft uses a keyway for positive torque transmission to pulleys, couplings, or gear inputs. A permanent shaft seal helps keep coolant and lubricants away from the bearing area in oily machine environments. The motor uses frame size 093 with length code D, giving it the core depth and thermal mass needed for its rated operating point.