Product Description:

The MDD093D-N-015-N2M-130PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor designed for digital drive controllers, it supplies rotary motion with closed-loop position control for automated machinery such as packaging stations, gantry axes, or material handling units. The unit combines permanent-magnet excitation with electronic feedback so that the drive can maintain commanded speed and torque under varying load.

Its mechanical envelope uses a centering diameter of 130 mm, and the D-length frame supports an internal winding stack that delivers a continuous standstill torque of 24.0 Nm. When energized by the drive, the rotor can reach a nominal speed of 1500 rpm, which aligns the electrical frequency with the motor’s four-pole construction. Power and feedback connectors are oriented on side A, and the interface uses a keyed connector that supports secure cable attachment without opening the housing. A shaft seal is installed to help prevent oil or coolant ingress at the output shaft, allowing installation inside machine enclosures where lubricants are present.

The drive controller reads motor position through Digital servo feedback (DSF) generated by an integrated multiturn absolute encoder, enabling homing-free operation after power cycles. The output shaft uses a keyway profile so couplings can be aligned repeatably, and a standardized balancing grade helps minimize residual vibration at operating speed. Because the unit is supplied without a blocking brake, stopping torque must be provided by the external drive or by mechanical locks when power is removed. A standard cast-aluminum housing supports thermal conduction, and the size 093 body with D length is suited for mid-range axes that cycle continuously through start, run, and hold phases.