MDD093D-N-015-N2M-130GR2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
17 Seconds
The Bosch Rexroth Indramat MDD093D-N-015-N2M-130GR2 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. It features a 24.0 Nm continuous torque at standstill, a nominal speed of 1500 min⁻¹, and a standard 130 mm centering diameter. The motor includes an integrated multiturn absolute encoder, digital servo feedback, and comes equipped with a 22 Nm blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MDD093D-N-015-N2M-130GR2 is a motor for digital drive controllers in the MDD Synchronous Motors series. As a permanent-magnet synchronous unit, it converts controlled armature current into smooth torque and speed for pick-and-place axes, machining centers, and packaging equipment. Its mechanical outline, electrical interfaces, and feedback arrangement are matched to compatible drive modules for closed-loop operation. This layout supports accurate positioning, repeatable speed control, and stable motion during reversing or load changes. It is suited to machines that require quick response at low speed as well as controlled acceleration between process steps.
The motor can exert a continuous standstill torque of 24.0 Nm, which allows it to hold demanding axis loads during normal operation. Under rated excitation, it reaches a nominal speed of 1500 rpm, allowing the drive to regulate a moderate operating speed range through vector control. A centering shoulder diameter of 130 mm aligns the housing with the machine frame for accurate concentric mounting. Power and feedback plugs are mounted on the right side, and the electrical interface uses connectors for orderly cable routing. Motion is transferred through a plain shaft that accepts standard clamping hubs or couplings without a keyed connection.
The integrated holding brake supplies 22 Nm of static torque, so the axis can remain in position when drive power is removed. Position information is generated by an integrated multi-turn absolute encoder, which gives the controller absolute angular data over multiple revolutions. The feedback signal is transmitted as Digital servo feedback (DSF), supporting accurate phase alignment and fast correction of speed or position error. Size code 093 sets the frame dimensions for this motor. This combination supports applications that need retained position and immediate reference after power-up. A shaft seal helps protect the internal bearings, and standard rotor balancing reduces vibration during continuous duty.
Frequently Asked Questions about MDD093D-N-015-N2M-130GR2:
Q: What is the continuous standstill torque capability of the MDD093D-N-015-N2M-130GR2 motor?
A: The MDD093D-N-015-N2M-130GR2 features a continuous torque of 24.0 Nm at standstill.
Q: Does the MDD093D-N-015-N2M-130GR2 include an integrated encoder?
A: Yes, this motor is equipped with an integrated multiturn absolute encoder.
Q: What is the holding brake torque provided by the MDD093D-N-015-N2M-130GR2?
A: The motor comes with a holding brake rated at 22 Nm for reliable holding force.
Q: Which direction is the electrical connection on the MDD093D-N-015-N2M-130GR2 motor?
A: The connection direction on this model is designed to be on the right side.
Q: What type of motor feedback does the MDD093D-N-015-N2M-130GR2 employ?
A: This motor uses digital servo feedback (DSF) for precise position detection.
