MDD093D-N-015-N2M-130GR0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
37 Seconds
The Bosch Rexroth Indramat MDD093D-N-015-N2M-130GR0 is a motor for digital drive controllers from the MDD Synchronous Motors series. It features a continuous torque at standstill of 24.0 Nm, a nominal speed of 1500 min⁻¹, and an integrated multiturn absolute encoder. The motor has a 130 mm centering diameter, a plain shaft with a shaft seal, and uses a right-angled connector for connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-015-N2M-130GR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts electrical input into controlled rotary motion for positioning tasks in automated conveyors, printing cylinders, and pick-and-place modules where close speed and position regulation are required. Its synchronous design supports repeatable motion on axes that must start, stop, and reverse without losing control accuracy. This type of motor is commonly used where the drive must coordinate torque production with encoder feedback to maintain smooth motion through changing load conditions.
The motor can deliver a continuous standstill torque of 24.0 Nm, allowing it to hold or move loads without overheating during prolonged dwell periods. A nominal operating speed of 1500 rpm provides a stable running point for typical production duty. Mechanical centering during installation is guided by a 130 mm centering diameter, and all power and feedback leads exit on the right side through a sealed connector. This one-sided connector layout helps simplify cable routing when the motor is installed in tight machine spaces. Rotor position is returned to the controller via Digital servo feedback (DSF), enabling high-resolution closed-loop control. Contaminant ingress at the rotating interface is limited by a shaft seal, making the unit suitable for environments that contain oil mist or airborne particles.
Dynamic balance is specified as Standard, so additional balancing is not usually required for common couplings. Position tracking across power cycles is maintained by an integrated multi-turn absolute encoder, which removes the need for a homing routine at startup. The motor is supplied without a blocking brake, so applications that require static holding torque must use an external brake or drive-controlled holding torque. The motor has a standard housing with a D-length frame in the 093 size. The plain shaft supports direct coupling to external transmission components, and there is no shaft extension on side B.
Frequently Asked Questions about MDD093D-N-015-N2M-130GR0:
Q: What type of encoder is included with the MDD093D-N-015-N2M-130GR0 motor?
A: This motor features an integrated multiturn absolute encoder for feedback.
Q: What is the continuous torque at standstill for this motor?
A: The MDD093D-N-015-N2M-130GR0 provides a continuous torque of 24.0 Nm at standstill.
Q: What type of shaft end is provided on the MDD093D-N-015-N2M-130GR0 motor?
A: The shaft end is standard and does not include a side B shaft end on this model.
Q: Does the MDD093D-N-015-N2M-130GR0 motor have a holding brake?
A: This model does not come with a holding or blocking brake included.
Q: Does the MDD093D-N-015-N2M-130GR0 include a shaft seal?
A: The shaft of this unit features a shaft seal to help protect against contaminants.
