Product Description:

Bosch Rexroth Indramat manufactures the MDD093D-N-015-N2M-130GL2. This model belongs to the MDD Synchronous Motors series and serves as a rotary actuator in computer-controlled production lines where precise speed regulation, repeatable positioning, and stable response are required. Coupled directly to gear stages or load shafts, it supplies controlled torque and velocity that follow drive commands, enabling coordinated motion in packaging cells, gantry systems, and general factory automation. Its electromagnetic design delivers rapid torque development while maintaining the feedback accuracy required for closed-loop servo regulation during changing loads, direction changes, and repeated automated cycles.

At standstill, the motor delivers 24.0 Nm of continuous torque, giving machines stable holding force during low-speed sequences and dwell periods under load. With proper drive excitation, it reaches a nominal speed of 1500 rpm, which matches common eight-pole synchronous applications. An internal blocking brake provides 22 Nm of static torque to secure the axis when power is removed. Motion feedback is supplied through digital servo feedback (DSF) from an integrated multiturn absolute encoder, so the controller can track position over multiple revolutions without losing the stored position value.

The flange includes a centering pilot of 130 mm to align the motor coaxially with couplings or reducers. Power and sensor leads connect through a connector positioned on the left side, which can simplify cable routing in tight cabinets. A plain shaft on side A transmits torque, and there is no shaft on side B, which helps keep the overall length short. An integrated shaft seal helps block coolant ingress, and the layout suits installations where cable exits and coupling access must fit within tight machine spaces near guards, covers, or adjacent assemblies. The motor is intended for use with digital drive controllers in closed-loop applications.