Product Description:

The MDD093D-N-015-N2M-130GB0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts commanded current into regulated mechanical rotation for positioning axes and process equipment. The motor supports closed-loop operation through its integrated feedback system, helping automated machinery maintain accurate motion and repeatable stopping behavior. It is commonly used in industrial automation lines, material-handling systems, and machining centers that require stable servo control over changing loads.

Its nominal speed is 1500 rpm, providing the rated continuous shaft velocity for normal operation. A continuous standstill torque of 24.0 Nm supports axes that must hold position when stopped, especially in indexing or vertical applications. Mounting uses a centering diameter of 130 mm, which seats the motor accurately in the machine interface. All power and feedback conductors exit on side B through a keyed connector that supports straightforward cable connection. For position detection, the motor uses an integrated multi-turn absolute encoder, allowing the controller to recover shaft position information after a power cycle without requiring a reference move.

Motion data is transmitted to the drive through digital servo feedback, and the rotor is balanced to the standard grade to help reduce residual vibration during operation. The motor has a plain shaft, and a shaft seal helps limit lubricant escape and contaminant entry at the output end. The housing uses a standard design for general-purpose environments. The unit is supplied without a blocking brake, so any load holding during power-off conditions must be provided by external braking hardware or controlled drive torque.