Product Description:

The MDD093D-N-015-N2M-130GA1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with compatible digital drive controllers in applications such as indexing tables, gantry axes, and material-handling stations where accurate torque and speed control are required. The motor supports closed-loop axis operation so commanded motion can be carried out with steady response during starting, running, and positioning. Its housing is suitable for direct installation on machinery, which helps integrate the motor into automated equipment without the need for external motion transducers.

At standstill, the motor delivers a continuous torque of 24.0 Nm, allowing it to support static loads without exceeding thermal limits. Under rated excitation, it reaches a nominal speed of 1500 rpm, which suits applications that favor torque and controlled motion over high rotational speed. Mechanical alignment during installation is assisted by a 130 mm centering diameter that helps seat the motor accurately against the machine interface. The integrated blocking brake provides 11 Nm of holding torque to help prevent axis drift when power is removed. Power is transmitted through a plain shaft, which works well with clamp-style couplings and similar drive elements.

Electrical and signal connections exit on Side A, which can simplify cable routing where access space around the motor is limited. Rotor position is reported through digital servo feedback, allowing the connected drive to monitor motion continuously during operation. An integrated multiturn absolute encoder preserves position information across multiple revolutions, so the axis can return to service without a reference run after a power interruption. A shaft seal helps limit the entry of dust and coolant spray at the output side. The motor also uses standard dynamic balancing and a D-length frame, supporting smooth operation across its intended speed range.