Product Description:

The MDD093D-N-015-N2M-110PR2 is a synchronous servo motor produced by Bosch Rexroth Indramat and supplied as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts commanded current into controlled rotary motion for industrial automation axes. The motor uses a standard housing, and the rotor is balanced to a standard grade to reduce vibration when coupled to precision mechanics. Size code 093 sets the frame dimensions used for this motor platform. This arrangement lets the motor support positioning, indexing, and speed-controlled duties in packaging, handling, and other automated equipment.

During operation, the motor delivers a continuous standstill torque of 24.0 Nm, providing steady force for static or low-speed duties. Its rated mechanical speed is 1500 rpm, so the drive controller can command shaft motion within the motor’s thermal capability. A blocking brake is fitted and, when energized, clamps the shaft with 22 Nm of torque during power-off conditions. Position data comes from an integrated multi-turn absolute encoder and is returned through digital servo feedback (DSF) for closed-loop control. The electrical interface uses a single industrial connector, and length designation D matches the active stack used for this torque class.

Mechanical installation uses a centering flange diameter of 110 mm, which aligns the motor body with adjacent machinery. Power and feedback leads exit on the right side, which can simplify cable routing when the unit is mounted longitudinally. The output shaft uses a keyway and a single-ended arrangement, so there is no shaft extension on side B. The motor also has a shaft seal at the front bearing to help limit lubricant escape and reduce contaminant entry. The shaft and seal arrangement is suitable for couplings, pulleys, and similar driven machine elements.