MDD093D-N-015-N2M-110PL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
57 Seconds
The Bosch Rexroth Indramat MDD093D-N-015-N2M-110PL2 is a motor for digital drive controllers from the MDD Synchronous Motors series, featuring a motor size of 093 and motor length code D. It offers a continuous torque at standstill of 24.0 Nm and a nominal speed of 1500 min-1. The motor comes with an integrated multiturn absolute encoder, a blocking brake with 22 Nm torque, and a keyway shaft with a standard centering diameter of 110 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-015-N2M-110PL2 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts commanded current into controlled rotary motion. This makes it suitable for positioning tables, pick-and-place axes, and other automated machine elements that require closed-loop speed and torque control. Its design also supports precise speed regulation and repeatable positioning during automated cycles.
The motor can sustain a continuous stall torque of 24.0 Nm, allowing it to hold or slowly move loads without exceeding thermal limits. During operation it reaches a nominal speed of 1500 rpm. That speed reflects synchronous shaft velocity under rated voltage, current, and cooling conditions. A built-in blocking brake produces 22 Nm of static torque so mechanical position is maintained when power is removed. This helps the axis remain in place during a stop. The drive-end pilot has a centering diameter of 110 mm, which helps align the housing with gearbox or frame bores. Position and velocity are returned to the controller through digital servo feedback (DSF), allowing accurate error correction during dynamic moves.
An integrated multi-turn absolute encoder tracks angular displacement over multiple revolutions, so the axis can retain position information after a power interruption. The front bearing region is supplied with a shaft seal, which helps limit lubricant loss and restrict particulate ingress. Power is transmitted through a keyway shaft, a form-fit interface commonly used with couplings and pulleys in industrial machinery. The motor uses length code D, which corresponds to the longest stator package in the 093 frame and supports higher torque density. It also uses standard dynamic balancing, a left-side connector interface for power and feedback cables, a single-ended shaft without a rear extension, and a standard-profile housing that mounts directly with series-compatible flanges. The left-side connector placement can simplify cable routing when the motor is installed near a cabinet wall or machine guard.
Frequently Asked Questions about MDD093D-N-015-N2M-110PL2:
Q: What type of shaft does the MDD093D-N-015-N2M-110PL2 motor have?
A: This model is equipped with a keyway type shaft for secure mechanical coupling.
Q: Which encoder type is included with the MDD093D-N-015-N2M-110PL2 motor?
A: This motor comes with an integrated multiturn absolute encoder for precise position feedback.
Q: Is there a holding brake on the MDD093D-N-015-N2M-110PL2 motor?
A: The MDD093D-N-015-N2M-110PL2 is built with a blocking brake that provides a holding brake torque of 22 Nm.
Q: What is the continuous standstill torque specification for the MDD093D-N-015-N2M-110PL2?
A: The continuous torque at standstill for this model is rated at 24.0 Nm.
Q: How is the electrical connection configured on the MDD093D-N-015-N2M-110PL2 motor?
A: This motor is designed for connection via a connector located on the left side.
