Product Description:

The MDD093D-N-015-N2M-110PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into rotary motion for axes that need accurate position and speed control in automated machinery. The D length code and 093 frame size place this model in the larger middle range of the series, giving a useful balance between installation space and continuous torque for indexing tables, gantries, and packaging stations. This layout suits machines that require repeatable motion, steady low-speed behavior, and dependable response during frequent start-stop cycles.

The motor delivers a continuous standstill torque of 24.0 Nm, so it can hold loads steadily when the axis is energized but motionless. During operation, it reaches a nominal velocity of 1500 rpm, matching drive frequencies used in slow- to medium-speed positioning tasks. Accurate mechanical centering is supported by a 110 mm centering diameter that aligns the housing to mounting flanges. Power and feedback cables exit on the left side, which can simplify cable routing when multiple axes are arranged side by side. Drive electronics receive feedback through digital servo feedback (DSF), allowing high-resolution closed-loop regulation and stable speed control during changing load conditions.

Standard dynamic balancing helps reduce residual vibration during rotation, and the housing remains standard, so no special cooling passages are required. Electrical terminations are made through a connector, and the integrated multi-turn absolute encoder provides absolute position data across multiple revolutions, which supports immediate position recognition after power-up. A shaft seal is fitted at the output end to limit lubricant escape and reduce the entry of contaminants into the bearing area. The ground-machined shaft is furnished with a keyway for positive drive coupling, and the shaft end uses the standard single-ended configuration without a side B extension. The motor is supplied without a blocking brake, so vertical or suspended loads require an external holding method when power is removed.