Product Description:

The MDD093D-N-015-N2M-110PB1 is a synchronous servo motor produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. As a motor for digital drive controllers, it supplies rotary motion that can be regulated precisely by closed-loop electronics in automated machinery. The unit combines a size 093 frame with the D length code, giving a compact profile for mid-range axes in material handling, packaging, and machine-tool applications.

It delivers a continuous stall torque of 24.0 Nm, allowing the axis to hold load without movement or overheating. During motion, the rotor can reach a nominal speed of 1500 rpm, which suits drives that adjust field frequency for smooth velocity control. The centering pilot on the flange measures 110 mm, helping the housing seat accurately on the machine mount. Power and feedback conductors are routed on the rear because the connections are on side B of the stator, and a keyed connector simplifies plug-in wiring. The motor is supplied with a shaft seal and a single shaft end, while the opposite side remains unused to reduce overall enclosure length.

The feedback system uses Digital servo feedback (DSF) to transmit high-resolution position data from the motor to the drive. An integrated multiturn absolute encoder tracks multiple mechanical revolutions, allowing the drive to recover exact position after power interruptions. For holding duties, the blocking brake provides 11 Nm of static torque to secure vertical loads when the inverter is disabled. Mechanical power is transmitted through a shaft with a keyway, which supports standard couplings without additional adapters. The motor also maintains standard dynamic balance to DIN tolerances, and its sealed construction helps limit lubricant escape while reducing dust entry around the shaft interface.