Product Description:

The MDD093D-N-015-N2M-110PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat for use with digital drive controllers, forming part of the MDD Synchronous Motors series. Designed for closed-loop motion tasks, it converts the regulated output of an Indramat drive into rotational energy with precise response to command changes. That rotary output is used to position tooling, conveyor sections, or indexing tables in industrial automation systems where stable speed and repeatable motion are required.

At stall, the motor supplies a continuous torque of 24.0 Nm, allowing it to restrain or slowly advance loaded axes without overheating. During higher duty cycles, the rotor can reach a nominal speed of 1500 rpm, so velocity control remains linear across the normal working range. Accurate mechanical alignment is supported by a 110 mm centering diameter that fits standard mounting flanges and helps keep runout low. Position data is returned through digital servo feedback, enabling the drive to close the loop on both speed and angle in real time. All power, signal, and brake conductors exit on Side B of the stator housing, which simplifies wiring when the machine frame blocks the opposite end.

The motor has a frame size of 093, and the extended rotor length code D increases magnetic surface area for higher dynamic torque without changing the mounting pilot. A keyed shaft end transmits torque, while a shaft seal helps prevent lubricant leakage when the motor is coupled to gearboxes or pump heads. Electrical terminations use a connector that preserves the standard housing rating and provides a compact cable interface. Because the unit is supplied without a blocking brake, any holding function must be provided by the downstream mechanism or by sustained drive current. The standard dynamic balance grade helps reduce residual vibration during continuous operation.