Product Description:

The MDD093D-N-015-N2M-110PA2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Supplied as a motor for digital drive controllers, it converts drive current into controlled rotary motion for positioning axes and speed-regulated machine functions in automated equipment. The unit uses a standard housing and standard dynamic balancing, which supports direct installation in common machine frames and helps maintain smooth running during continuous operation.

The motor delivers a continuous standstill torque of 24.0 Nm, allowing it to hold a load at standstill without overheating when the shaft is locked. At its rated operating point, the rotor reaches 1500 rpm, a speed suited to medium-throughput material handling and transfer stations. A centering diameter of 110 mm provides the locating feature for accurate flange alignment. Power and feedback conductors exit on Side A through a sealed connector, which helps simplify cable routing in compact cabinets and protects the electrical interface from contamination. The motor uses size code 093 with length code D, giving it a longer active stack while keeping the overall frame within the common 093 footprint. The shaft is supplied without a side B extension, reducing the space needed at the non-drive end and leaving more clearance for nearby machine parts.

Position holding during power-off is handled by an integrated blocking brake that produces 22 Nm of static torque, so external clamping hardware is not required on many vertical axes. A keyway shaft transmits torque through standard keyed couplings, and a factory-installed shaft seal helps prevent lubricant migration into the stator air gap. Feedback is supplied as Digital servo feedback (DSF), and rotor position is resolved by an integrated multiturn absolute encoder so the controller can retain position data after shutdown. This feedback arrangement supports closed-loop motion on axes that need accurate restart behavior after power is restored.