Product Description:

The MDD093D-N-015-N2M-110PA0 synchronous motor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into controlled mechanical rotation for positioning axes and speed-regulated motion in automated machinery. An integrated multi-turn absolute encoder records rotor position over several revolutions, so position information remains available after power is restored. This arrangement suits machines that need stable low-speed torque, repeatable motion, and a mounting format that fits common industrial layouts.

It delivers a continuous standstill torque of 24.0 Nm, allowing the axis to resist static process loads without excessive heating. The base operating point is a nominal speed of 1500 rpm, which suits applications that favor torque over very high rotational speed. Accurate mounting is supported by a pilot diameter of 110 mm, which helps seat the motor correctly on the machine interface. Power and feedback connections leave through a connector on side A, keeping cables away from the driven shaft during installation. The motor uses size code 093, and the standard cast housing releases heat through conduction and natural convection during normal operation.

The encoder transmits position data through digital servo feedback, allowing the drive to process precise speed and position information in closed-loop operation. Stack length code D indicates an extended active section that increases torque capacity within the same frame family. A keyway shaft is fitted with a shaft seal, which helps limit the entry of dust and oil at the front bearing area. The motor is supplied without a blocking brake, so any holding force at standstill must come from drive torque or an external restraint. The design uses a single shaft end and a connector-based interface, making it suitable for couplings, pulleys, and gearbox inputs that use standard motor mounting arrangements.