Product Description:

The MDD093D-N-015-N2M-110GR2 is a synchronous servo motor in the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. Built for digital drive controllers, it provides closed-loop speed and torque control for automated handling stations, packaging lines, and general machine tools. Size code 093 and length code D identify its frame dimensions, while a standard housing and standard balancing let it couple directly to precision loads without added vibration-isolation hardware. This arrangement supports repeatable motion on axes that must respond accurately during frequent start-stop cycles.

At standstill, the motor can sustain a continuous torque of 24.0 Nm, allowing stable holding or slow positioning without thermal overload. Its nominal operating speed is 1500 rpm, which suits low-to-medium-speed axes that still require high torque density. The centering diameter of 110 mm provides the pilot fit used to align the flange accurately on the mounting surface. Both power and feedback plugs exit on the right side, and a single cylindrical connector carries the conductors so cable routing stays compact inside the machine. The plain front flange supports direct attachment to gearboxes or timing-belt pulleys.

A blocking brake integrated at the fan end supplies up to 22 Nm of static holding torque to secure vertical or indexing shafts when the inverter is disabled. Rotor position is monitored by an integrated multi-turn absolute encoder, with data transmitted through digital servo feedback (DSF) for high-resolution position loops. Mechanical power is delivered through a plain shaft, and a shaft seal surrounds this output to help protect internal components from contaminants. With no side B shaft end, the rear face can mount close to neighboring modules while keeping access clear to the right-hand connection point. This layout helps conserve installation space in dense multi-axis assemblies.