MDD093D-N-015-N2M-110GL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
11 Seconds
The Bosch Rexroth Indramat MDD093D-N-015-N2M-110GL2 is part of the MDD Synchronous Motors series. This motor for digital drive controllers has a continuous torque at standstill of 24.0 Nm and a nominal speed of 1500 min⁻¹. It features an integrated multiturn absolute encoder and comes with a holding brake that provides 22 Nm of torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-015-N2M-110GL2 is a synchronous servomotor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for direct pairing with digital drive controllers, the unit converts electrical power from the drive into precisely regulated mechanical rotation for positioning, indexing, and speed-controlled transport tasks on automated lines. Its standard housing, integrated multiturn absolute encoder, and connector-based power and feedback ports support straightforward installation while providing the high-resolution feedback required for closed-loop motion control. This arrangement allows the motor and controller to work together for accurate response during changing load and speed conditions.
At stall, the motor supplies a continuous torque of 24.0 Nm, allowing machinery to hold load steadily without excessive heating. When driven at its rated frequency, the rotor reaches 1500 rpm, a speed suited to applications that need high torque at moderate rotational speed. A centering pilot of 110 mm keeps the stator coaxial with the driven load during flange mounting. Power and feedback connectors exit on the left side, which can simplify cable routing in cabinets arranged for left-hand terminations. Position data travels through digital servo feedback (DSF), so the controller receives high-resolution information for tight velocity and position loops. Standard dynamic balancing helps keep vibration at levels suitable for general industrial machinery.
A blocking brake rated at 22 Nm secures vertical or suspended loads during power-off conditions. The shaft is a plain shaft, and the presence of a shaft seal helps keep coolant or dust from migrating along the journal into the bearings; no side-B shaft end is provided. With frame size code 093, the motor uses the mounting geometry associated with this MDD size. Motor length code D gives the housing a longer axial form within that frame, and the standard housing supports routine installation in enclosed industrial equipment.
Frequently Asked Questions about MDD093D-N-015-N2M-110GL2:
Q: What type of shaft does the MDD093D-N-015-N2M-110GL2 motor have?
A: The MDD093D-N-015-N2M-110GL2 includes a plain shaft as its shaft type.
Q: Does the MDD093D-N-015-N2M-110GL2 motor have a holding brake?
A: This model is equipped with a holding brake that provides a holding torque of 22 Nm.
Q: What encoder is included with the MDD093D-N-015-N2M-110GL2?
A: It features an integrated multiturn absolute encoder for feedback and position detection.
Q: What is the continuous torque at standstill of the MDD093D-N-015-N2M-110GL2?
A: The continuous torque at standstill for this motor is 24.0 Nm.
Q: What is the nominal speed of the MDD093D-N-015-N2M-110GL2 motor?
A: The MDD093D-N-015-N2M-110GL2 has a nominal speed of 1500 min⁻¹.
