Product Description:

The MDD093D-N-015-N2M-110GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is supplied as a motor for digital drive controllers, providing closed-loop torque and position control in automated machinery such as indexing tables, gantry axes, and packaging stations. The integrated multiturn absolute encoder supports direct position feedback to the drive, and the housing follows the standard frame design for this motor size. Its closed-loop design allows the controller to correct position error quickly and maintain stable motion during frequent starts, stops, and load changes.

This model delivers a continuous standstill torque of 24.0 Nm, so it can hold static loads without additional gearing. A nominal speed of 1500 rpm is the rated operating speed when the electromagnetic field remains synchronized with the drive inverter. The centering diameter measures 110 mm, which helps align the stator precisely on the machine mounting face for balanced rotation. Power and feedback conductors exit on the left side, and the single-piece plug-in connector keeps cable routing compact while maintaining shielding continuity. This arrangement supports orderly installation where side cable exit is preferred near adjacent machine components.

The motor has a length code of D, which uses an extended stack to increase active iron volume and support higher torque density than shorter versions. A blocking brake is installed and can apply up to 11 Nm to secure vertical or suspended axes during power loss. Position data is returned through digital servo feedback, enabling high-resolution loop closure without a separate resolver. The motor uses a plain shaft with a shaft seal, which reduces friction and helps prevent lubricant escape and contaminant ingress during continuous duty. Standard dynamic balancing and a conventional steel housing help limit vibration while keeping the overall mechanical footprint consistent with other 093-frame motors.