Product Description:

Bosch Rexroth Indramat builds the MDD093D-N-015-N2M-110GL0 as part of the MDD Synchronous Motors series. Supplied to digital drive controllers, the motor translates commanded current into precise rotary motion for automated positioning, speed regulation, and indexing tasks. It is suited for conveyors, gantries, and machining axes where closed-loop motion must remain accurate through repeated operating cycles. This type of servo motor is commonly used where the drive must manage smooth acceleration, controlled stopping, and repeatable positioning.

The motor can apply a continuous standstill torque of 24.0 Nm, allowing closed-loop drives to hold static loads without additional gearing. Its nominal operating speed is 1500 rpm, matching axes that favor high torque at moderate revolutions. Power and feedback conductors exit on the left side through a sealed connector, which can simplify cable routing in compact machine layouts. A shaft seal helps keep oil or coolant away from the bearings. The housing is supplied in the standard configuration for this motor type, and the sealed connector arrangement also helps protect the cable exit point during routine machine operation.

A balancing grade of Standard reduces residual vibration when the plain shaft is coupled to flexible components, and the flange uses a 110 mm centering diameter for accurate alignment to gearboxes or machine walls. Position data comes from an internal integrated multi-turn absolute encoder, while velocity is reported through digital servo feedback (DSF), so the controller can track shaft movement across multiple revolutions. The motor uses length code D and size 093, which correspond to its stack length and frame dimensions within the series. It is delivered without a blocking brake, so power-off holding must come from drive torque or an external clamp. A standard shaft end on side A and the absence of a side B shaft keep the mechanical interface limited to one output end.