MDD093D-N-015-N2M-110GB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
6 Seconds
The Bosch Rexroth Indramat MDD093D-N-015-N2M-110GB0 is a motor for digital drive controllers and part of the MDD Synchronous Motors series. It features a continuous torque at standstill of 24.0 Nm, a nominal speed of 1500 min⁻¹, and an integrated multiturn absolute encoder with digital servo feedback. The motor has a 110 mm centering diameter, a plain shaft with shaft seal, and uses a connector on side B for connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-015-N2M-110GB0 is a synchronous servo motor built by Bosch Rexroth Indramat and placed within the MDD Synchronous Motors series. As a motor for digital drive controllers, it serves in closed-loop motion systems where precise torque and speed regulation are required in industrial automation cells, packaging modules, material-handling stages, and multi-axis gantries. It converts controlled electrical power into rotary motion for direct connection to gearboxes, pulleys, or other machine transmission elements. This makes it suitable for axes that must start, stop, and reverse with repeatable response. The closed-loop design also helps the axis maintain stable motion when load conditions change during operation.
The motor body uses the standard balancing grade, and its centering pilot measures 110 mm, providing repeatable seating on machine frames. Model size 093 and length D support a continuous standstill torque of 24.0 Nm without thermal overload. Rated operation is reached at 1500 rpm, which suits moderately paced axes that need steady speed control rather than very high top-end velocity. Power and feedback cables exit on side B through a sealed connector, helping keep cable routing orderly. A standard aluminum housing promotes even heat dissipation when cabinet airflow removes heat from the installation area, helping temperature rise remain manageable during repeated duty cycles.
Position data are generated by an integrated multiturn absolute encoder and returned through digital servo feedback (DSF), so the drive receives continuous rotor position information with high resolution. Because the encoder is absolute and multiturn, the controller can retain position information across multiple revolutions after a restart. Because the unit is supplied without a blocking brake, holding force must come from the drive or an external clamp when power is removed. A shaft seal helps limit lubricant escape and coolant entry, and it is paired with a plain shaft to keep the output interface simple. The motor also has no rear shaft extension, which leaves the non-drive end in a basic single-shaft configuration.
Frequently Asked Questions about MDD093D-N-015-N2M-110GB0:
Q: What is the continuous torque at standstill for the MDD093D-N-015-N2M-110GB0 motor?
A: This model supports a continuous torque at standstill of 24.0 Nm, providing consistent performance for its rated output.
Q: What type of encoder is built into the MDD093D-N-015-N2M-110GB0 motor?
A: The MDD093D-N-015-N2M-110GB0 features an integrated multiturn absolute encoder for precise position feedback.
Q: Does the MDD093D-N-015-N2M-110GB0 come with a holding brake?
A: This motor is manufactured without a blocking brake and is therefore not equipped with a holding brake.
Q: Where is the electrical connection located on the MDD093D-N-015-N2M-110GB0 motor?
A: The connection on this model is via a connector on Side B, allowing for organized cable management.
Q: What type of shaft and sealing does the MDD093D-N-015-N2M-110GB0 have?
A: The shaft on this motor is a plain shaft equipped with a shaft seal for added protection.
