Product Description:

The MDD093D-N-015-N2M-110GA2 is a synchronous motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for pairing with digital drive controllers so that automated axes receive closed-loop torque and velocity control during assembly, packaging, or machining cycles. By supplying rated motor data to the drive, the unit supports fast setup and provides a direct electromechanical interface for motion sequences that need repeatable position accuracy and moderate continuous torque.

The motor can apply 24.0 Nm of continuous torque while stationary, giving machine builders enough holding force for indexing tables and vertical loads. A nominal speed of 1500 rpm gives the synchronous rotational speed available under rated voltage and cooling, which simplifies gear-ratio selection in low-speed processes. The centering diameter is 110 mm; this locates the stator housing concentrically on its mounting surface and limits radial runout. An internal blocking brake delivers 22 Nm of torque when power is removed, securing loads during maintenance or emergency stops. Position and velocity are reported by digital servo feedback (DSF), and multi-turn position data comes from the integrated multi-turn absolute encoder. These feedback channels allow the drive to maintain electrical commutation and absolute machine position without battery-backed reference moves.

Cabling exits on Side A, and power and feedback conductors connect through a single industrial connector to streamline installation inside cableways. The rotor transmits torque through a plain shaft, so couplings or pulleys can be fitted without keyways, which helps reduce vibration in high-precision operation. Standard balancing and a standard sealed housing keep residual forces within ISO limits and protect the windings from airborne coolant or dust. A shaft seal is included to restrict lubricant migration into the motor interior and support continuous-duty use.