Product Description:

The MDD093D-N-015-N2M-110GA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts regulated current from an inverter into rotary motion for positioning and feed tasks in industrial automation. The motor is suited for axis drives that require controlled speed, repeatable positioning, and continuous feedback during operation. Its integrated multiturn absolute encoder returns position data to the drive so closed-loop control can continue after a power interruption. This arrangement allows the controller to identify rotor position immediately after startup.

The motor delivers a continuous standstill torque of 24.0 Nm, which provides holding force for stationary axes while the drive remains active. Its nominal speed is 1500 rpm, giving the drive a stable operating point for synchronized motion and feed applications. Accurate mounting is supported by a centering diameter of 110 mm, which helps align the motor with gearboxes or machine adapters. Power and feedback conductors exit on Side A through a connector interface, which keeps the cable connection compact and organized. Position data is handled through digital servo feedback for high-resolution commutation and closed-loop correction during acceleration and load changes.

The motor uses a standard vibration grade to help limit imbalance across the speed range and support smooth rotation. A shaft seal protects the area around the plain shaft from oil or coolant ingress during machine operation. That arrangement is useful in enclosed machine areas where contamination around the shaft must be limited. The housing has a standard surface finish intended for normal indoor industrial environments. Because the motor is supplied without a blocking brake, holding force must be provided by the drive or by an external clamp when power is removed.