Product Description:

The MDD093D-N-015-N2L-130PR1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it provides controlled mechanical power for positioning, conveying, and tooling axes in automated machinery. Its standard housing and internal balancing make it suitable for mounting on machine frames where stable running and repeatable motion are required. This arrangement allows the motor to deliver controlled torque and speed in servo systems that require consistent response during repeated duty cycles.

The motor mounts against a reference shoulder created by a centering diameter of 130 mm, which helps maintain coaxial alignment with gearboxes or flanges. A continuous standstill torque of 24.0 Nm allows the drive to hold static loads without overheating, while the nominal operating speed of 1500 rpm sets the base velocity used for selecting drive inverters and gearing ratios. Feedback is supplied through Digital servo feedback (DSF), giving the controller rotor position data for accurate closed-loop regulation. Power and encoder leads exit on the right side through a prewired circular connector, which simplifies cable routing in panels with fixed trunking paths. Standard dynamic balancing minimizes residual runout forces during acceleration.

An integrated blocking brake generates 11 Nm of static holding torque, letting vertical or overhung axes stay locked when system power is removed. The shaft is machined with a keyway to transmit torque through keyed couplings, and a shaft seal helps protect the bearing cavity from coolant splash or airborne particulates. Frame size 093 identifies the stator diameter, while length code D indicates the longest rotor-stator stack available in this frame and increases power density without increasing the mounting footprint. The motor has a single-ended shaft configuration without a side B extension, and it uses a standard connector interface.