Product Description:

The MDD093D-N-015-N2L-130PL2 is a synchronous servo motor produced by Bosch Rexroth Indramat in the MDD Synchronous Motors series. It is supplied as a drive element for digital motion controllers where precise rotary positioning and process-linked speed regulation are required. When paired with a compatible drive, the motor supports closed-loop control of torque and velocity for packaging stations, transfer units, and general automation axes. Its synchronous design also supports smooth speed changes and repeatable response during frequent start-stop cycles. That behavior is useful on indexing tables and feed systems where short moves and rapid reversals occur throughout the duty cycle.

The motor delivers a continuous standstill torque of 24.0 Nm, enabling it to hold static loads without overheating when the shaft is locked. During motion, its rotor reaches a nominal speed of 1500 rpm, which suits many industrial axis applications that need stable mid-range velocity. An integrated blocking brake supplies 22 Nm of holding torque so vertical or suspended mechanisms remain secure after power is removed. The brake works independently of servo control, so the axis can remain in place at standstill when drive power is not available. Position data is returned through Digital servo feedback (DSF), which sends signals for precise drive regulation and consistent commutation. Mounting concentricity is guided by a 130 mm centering diameter, allowing repeatable alignment to gearboxes or flange plates.

The shaft uses a keyway, which provides a direct method for securing pulleys or couplings to the motor output. Power and feedback leads exit on the left side, and the removable connector arrangement allows cables to be attached without opening the housing. This layout keeps the power and signal interfaces grouped in one area, which can reduce tight cable bends near the motor housing. It can also help on machine layouts that need clear access around the rear of the motor. The length code D indicates the longest housing stack in the 093 frame, increasing copper volume and thermal capacity while keeping the standard housing and shaft-seal arrangement.