Product Description:

The MDD093D-N-015-N2L-130PL1 is a servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is built for digital drive controllers where closed-loop regulation of position and velocity is required in industrial automation cells, material-handling stations, and synchronized multi-axis assemblies. Its synchronous design supports accurate motion during indexing, transfer, and positioning tasks. This makes it suitable for machines that need consistent response during repeated starts, stops, and dwell periods.

The motor can hold a constant shaft output of 24.0 Nm at standstill, so it can deliver rated torque without forced cooling. A nominal operating speed of 1500 min⁻¹ matches slow-moving precision axes such as index tables and feed mechanisms. Accurate mounting is aided by a centering diameter of 130 mm, allowing repeatable alignment with gearboxes or load flanges. Power and feedback leads exit on the left side of the housing, which can simplify cable routing in tight machine layouts. Rotor position is reported through digital servo feedback (DSF), giving the associated controller position data after every power cycle and supporting fine velocity loops.

An integrated blocking brake supplies 11 Nm of static holding torque, so vertical axes remain locked when power is removed. The shaft is machined with a keyway that transmits torque to couplings without slip, and electrical connections are made through a single industrial connector rather than flying leads. The frame size code is 093, and the D-length stator provides the magnetic volume needed for the listed continuous torque. Standard dynamic balancing helps limit vibration during repetitive motion. A shaft seal is fitted to keep lubricants inside the bearing cavity, and the motor has a standard shaft end on side A with no extension on side B.