Product Description:

The MDD093D-N-015-N2L-130GR1 is a synchronous servo motor produced by Bosch Rexroth Indramat and part of the MDD Synchronous Motors series. Designed for digital drive controllers, it converts controlled current into rotary motion for positioning and velocity loops in industrial automation. A plain shaft provides the mechanical output while side B remains closed, and the electrical interface uses a sealed multi-pin connector that mates directly with matching drive cables. Its synchronous design supports stable torque production and accurate response when the connected controller adjusts current during changing load conditions.

The motor can sustain a continuous stall torque of 24.0 Nm without exceeding its thermal limits. At its nominal operating point, it reaches 1500 rpm, a speed that suits gearhead matching and helps keep acoustic noise low. It is delivered with a blocking brake that provides 11 Nm of holding torque to help prevent axis drift when the controller is disabled. Rotor position is returned to the drive through digital servo feedback, allowing commutation and fine velocity control with single-turn resolution. Power, brake, and feedback conductors exit the frame through a sealed connector, which keeps wiring modular. The housing uses the standard enclosure variant, and the D length code provides the active stack used for this torque class.

A 130 mm centering diameter mates with precision spigots on gearboxes or adapter plates. The rotor is balanced to the standard grade, and the stator frame corresponds to size 093. The electrical connector is positioned on the right side, which simplifies cable routing in machines with multiple parallel axes. A shaft seal helps protect the bearing set against coolant spray or lubricants. This arrangement suits installations where clearance around the motor is limited and cable direction matters for adjacent axes. The motor also uses a standard housing finish for typical industrial service.