Product Description:

The MDD093D-N-015-N2L-130GB2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded drive current into precise rotary motion for automated axes, material-handling equipment, and process machinery. The motor uses the 093 frame with a D-length stator stack, which increases torque capacity while staying within the mounting envelope commonly used for MDD installations. This arrangement suits packaging, transfer, and positioning axes that require repeatable motion during frequent start-stop cycles.

The motor can deliver a continuous standstill torque of 24.0 Nm, which supports direct load holding at zero speed when the application does not rely on extra gearing. During operation it reaches a nominal speed of 1500 rpm, making it suitable for indexing tables and feed drives that require controlled, low-noise rotation. A factory-installed blocking brake provides 22 Nm of static torque to hold vertical or suspended loads when power is removed. Accurate mounting is supported by a 130 mm pilot diameter, and rotor position is transmitted through digital servo feedback (DSF) for closed-loop speed and position control. Its synchronous design also supports stable torque response throughout normal servo operation.

The extended D length increases the magnetic stack depth without changing the basic 093 flange outline. Power, brake, and feedback leads exit on Side B through a keyed connector, which helps keep cable routing organized in compact machine layouts. The motor has a plain shaft with a factory-installed shaft seal, allowing direct coupling while helping limit contaminant entry at the shaft opening. Standard balancing and the standard housing support smooth running, and the drive-side shaft arrangement is suited to inline couplings without a rear shaft extension.