Product Description:

The MDD093D-N-015-N2L-130GB0 is a synchronous servo motor from the MDD Synchronous Motors series by Bosch Rexroth Indramat. It is intended for use with digital drive controllers, where inverter-supplied current is converted into controlled rotary motion for positioning and speed-regulated tasks. This type of motor is commonly used in packaging systems, machine tools, and assembly equipment that require repeatable motion. Its size-093 housing suits machine layouts that need moderate inertia and stable continuous torque in a compact servo package.

The motor provides a continuous standstill torque of 24.0 Nm, which supports holding force and low-speed operation without excessive thermal loading. Its nominal speed is 1500 rpm, giving the connected drive a moderate operating speed for controlled axis motion. A centering diameter of 130 mm helps align the housing accurately with the mounting pilot and supports consistent shaft positioning after installation. Position and velocity signals are supplied by Digital servo feedback (DSF), allowing the controller to monitor rotor movement and maintain closed-loop regulation. The shaft end is equipped with a shaft seal, which helps limit the entry of dust and other contaminants at the shaft passage.

Electrical and signal conductors exit on side B, which can simplify cable routing where the machine layout favors right-hand cable egress. The power connection uses a connector, providing a compact interface for motor wiring while preserving enclosure integrity. Mechanical output is transmitted through a plain shaft, so couplings or belt pulleys can be mounted directly on the shaft end. The motor is supplied without a blocking brake, so any load that must remain fixed after power removal requires holding torque from the drive or a separate mechanical restraint. The rotor is dynamically balanced to a standard grade, and the housing follows a standard contour.