MDD093D-N-015-N2L-110PR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
28 Seconds
The Bosch Rexroth Indramat MDD093D-N-015-N2L-110PR1 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. It features a continuous torque at standstill of 24 Nm and a nominal speed of 1500 min-1. The motor has a centering diameter of 110 mm, includes a holding brake with 11 Nm torque, and comes with digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-015-N2L-110PR1 is a synchronous servo motor produced by Bosch Rexroth Indramat in the MDD Synchronous Motors series. It is designed for use with digital drive controllers, where commanded current is converted into precise rotary motion for machine tools, pick-and-place stations, and packaging equipment. Internal position electronics support closed-loop operation, allowing the drive to regulate speed and position accurately during changing load conditions. The motor uses a metric flange, so it can be mounted directly to compatible machine structures without additional adapter hardware.
At standstill, the motor delivers a continuous 24.0 Nm of torque, which allows positioning axes to maintain force without added cooling. The rated speed is 1500 rpm, giving the drive a stable operating point for controlled acceleration and steady running. Rotor position is reported through digital servo feedback (DSF), which provides the controller with the information needed for precise current correction. Cables exit on the right side, and a single connector carries both power and feedback to simplify machine wiring. A blocking holding brake is built into the motor to lock the shaft when power is removed, while standard dynamic balancing and a standard housing help reduce vibration during operation. The D-length stator increases the active stack length, and a shaft seal helps keep coolant away from the front bearing.
When power is removed, the brake can hold up to 11 Nm of static load, which helps prevent drifting on vertical axes. The flange has a 110 mm centering diameter that supports accurate alignment in matching machine bores. Torque is transmitted through a keyed shaft, making it suitable for standard hub connections used in industrial drive systems. The motor has a frame size of 093, matching components commonly used for this diameter class. The shaft end is present only on side A, with no extension on side B, so there is only one mechanical output to connect to the driven load.
Frequently Asked Questions about MDD093D-N-015-N2L-110PR1:
Q: What is the continuous torque at standstill for the MDD093D-N-015-N2L-110PR1 motor?
A: This motor features a continuous standstill torque of 24.0 Nm.
Q: Does the MDD093D-N-015-N2L-110PR1 have a holding brake and what is its torque?
A: The MDD093D-N-015-N2L-110PR1 model includes a blocking brake with a torque of 11 Nm.
Q: What type of feedback does the MDD093D-N-015-N2L-110PR1 motor use?
A: Motor feedback is provided by digital servo feedback (DSF) on this model.
Q: What is the nominal speed of the MDD093D-N-015-N2L-110PR1 motor?
A: The nominal speed for this motor is rated at 1500 min⁻¹.
Q: What type of shaft and sealing does the MDD093D-N-015-N2L-110PR1 motor feature?
A: This model utilizes a keyway shaft with a shaft seal for secure and protected operation.
