Product Description:

The MDD093D-N-015-N2L-110PL1 is a brushless AC servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is designed for use with digital drive controllers and converts regulated inverter current into precise rotary motion. This allows machine axes to follow programmed position or speed commands in CNC machinery, printing lines, and handling robots. The motor is suited to applications that require repeatable speed regulation and accurate positioning under changing load conditions.

At standstill, the rotor can sustain a continuous torque of 24.0 Nm, allowing heavy loads to be held without thermal overload. During motion, it is optimized for a nominal speed of 1500 rpm, which is the rated operating speed used when sizing gearing or ball screws. A spring-applied blocking brake delivers up to 11 Nm of mechanical holding force when power is removed, providing passive axis retention on vertical stages. Mounting concentricity is referenced to a centering diameter of 110 mm, which helps align the motor with gearboxes or adapter plates. Position and velocity data are returned to the drive through Digital servo feedback (DSF), permitting high-resolution closed-loop control.

Cabling exits on the left side, so electrical ducting can be arranged accordingly in multi-axis cabinets. The letter D in the type code indicates the stator length, which provides more active iron and supports higher torque density. Frame size 093 corresponds to the housing cross-section and bolt pattern used for this motor platform. Torque is transmitted through a keyed shaft, and the keyway helps prevent slippage under reversing loads while a factory-installed shaft seal limits lubricant escape and contaminant ingress. Standard dynamic balancing minimizes vibration, and the integrated connector design keeps cable attachment straightforward at the motor housing.