Product Description:

The MDD093D-N-015-N2L-110PL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It works with digital drive controllers to provide regulated torque and speed for automated material-handling axes, machining centers, and similar equipment. This arrangement supports accurate acceleration, steady low-speed operation, and repeatable positioning in closed-loop systems. The D-length frame and 093 stator size place the unit in the mid-range of the series, combining moderate torque density with a compact mounting envelope for multi-axis machines.

Under continuous load, the rotor supplies 24.0 Nm of standstill torque, so an axis can resist external forces until motion is commanded. The motor reaches a nominal speed of 1500 rpm, which suits feed axes and positioning tables that prioritize controlled movement over very high shaft speed. A centering diameter of 110 mm aligns the standard housing to the machine flange, helping preserve concentricity during installation. Heat is removed through the housing surface, so proper thermal contact and an appropriate duty cycle are important during operation. Position and velocity data are returned through digital servo feedback, and all conductors exit on the left to support orderly cable routing when the drive is mounted below the motor.

Power and feedback lines connect through a Connector, providing a direct interface at the motor. A shaft seal protects the front bearing area against coolant splash and dust in guarded machinery. Because the output shaft uses a keyway, hubs and couplings can transmit torque without relying on friction alone. The motor is supplied without a blocking brake, so static holding force must be provided by the drive or by an external holding device when the axis is stopped. The standard shaft end has no side-B output, which helps keep the overall motor length compact.