Product Description:

The MDD093D-N-015-N2L-110PB0 synchronous servo motor is manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts commanded phase currents into controlled rotary motion for axis positioning, velocity regulation, and coordinated moves in assembly lines, packaging machines, and material-handling systems. This operating role suits servo axes that start, stop, and reverse repeatedly under programmed motion profiles. Its compact housing helps it fit machine layouts that need a 093-frame motor without sacrificing the closed-loop response expected from a servo axis.

At standstill, the motor supplies a continuous torque of 24.0 Nm, allowing it to hold or slowly index loads without overheating. Rotational speed is rated at 1500 rpm, which suits applications that need stable mid-range speed rather than high-speed spindle operation. Accurate mounting is assisted by a 110 mm centering diameter that seats the flange to the machine frame. Power and feedback plugs are oriented toward side B, which helps keep cabling clear of the driven shaft. Torque is transmitted through a shaft with a keyway, providing positive engagement with couplings or timing pulleys during bidirectional load reversals.

The motor has a shaft seal to help block oil ingress at the output end. Position data is returned through digital servo feedback, giving the connected drive high-resolution feedback for closed-loop control. The motor uses length code D, which indicates a longer active magnetic stack within this housing size. It is supplied without a blocking brake, so any holding function at standstill must be provided by the drive or by external machine hardware. Connections are made through a sealed industrial connector, and the design includes only the primary shaft end with no extension on side B.