Product Description:

The MDD093D-N-015-N2L-110PA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where regulated electrical input is converted into controlled shaft rotation for position and speed control in automated machinery. The D-length frame and 093 size give the motor a footprint suited to mid-range axes used in production equipment. Its standard housing and standard dynamic balancing support stable operation in common machine layouts.

Under rated conditions, the motor reaches a nominal speed of 1500 rpm, which suits many gear ratios and motion profiles used in handling and tooling applications. At standstill, it can provide 24.0 Nm of continuous torque for load holding during controlled operation. A centering diameter of 110 mm helps align the flange accurately with the machine interface and supports proper mounting. Power and feedback conductors exit on Side A, and the motor uses a single-plug Connector connection so cable routing remains straightforward. This arrangement supports clean installation without fixed cable tails extending from the housing.

The motor is supplied without a blocking brake, so holding force during power loss must come from external clamping or controlled drive torque. Rotor position is transmitted through Digital servo feedback (DSF), allowing the drive to maintain synchronized commutation during rapid motion changes. The output uses a keyway shaft end for torque transfer to matching hubs and couplings. The front shaft extension is supplied with a shaft seal to help limit lubricant leakage and reduce the entry of contaminants. The shaft on side B is omitted, which keeps the rear of the motor compact and leaves space for the integrated feedback components.