Product Description:

The MDD093D-N-015-N2L-110GR2 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for digital drive controllers that require accurate torque and speed regulation on positioning, feed, and spindle axes in automated machinery. A standard housing, standard rotor balancing, and an integrated blocking brake support reliable use on machine tools and handling systems. A single-cable connector arrangement also keeps power, brake, and feedback routing compact at the motor interface.

At standstill, the motor supplies a continuous torque of 24.0 Nm, allowing it to hold loads or advance slowly without thermal overload. During normal operation, the rotor reaches a nominal speed of 1500 rpm, providing a stable operating speed for the driven axis. When power is removed, the blocking brake provides a holding torque of 22 Nm to secure vertical or suspended loads. The flange uses a 110 mm pilot diameter for concentric alignment with attached gearboxes or machine frames. Power, brake, and feedback conductors are grouped in a sealed connector that exits the stator housing, reducing exposed wiring around the motor.

All terminations point to the right side, which helps keep cable runs consistent along guards, gantries, or machine frames. The hardened output member is a plain shaft, allowing direct coupling with clamping hubs or timing pulleys. High-resolution commutation is provided by digital servo feedback, which supports stable closed-loop control and precise rotor position reporting to the connected drive. With length designation D, the stator stack has added thermal mass while remaining within the 093 frame size. A factory-installed shaft seal helps keep coolant splash and airborne debris out of the bearing chamber during extended operation.