MDD093D-N-015-N2L-110GR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
52 Seconds
The Bosch Rexroth Indramat MDD093D-N-015-N2L-110GR1 is part of the MDD Synchronous Motors series and is a motor for digital drive controllers. It features a continuous torque at standstill of 24 Nm, a nominal speed of 1500 rpm, and digital servo feedback. This motor comes with a plain shaft, a 110 mm centering diameter, and a holding brake torque of 11 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-015-N2L-110GR1 is an AC synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed to operate with digital drive controllers, the unit converts electrical commands into controlled rotary motion for indexing tables, gantry axes, and similar industrial automation duties. Positional data is returned through digital servo feedback, allowing the controller to monitor rotor movement and correct following error during operation. Its synchronous design supports repeatable speed control and accurate positioning when paired with a compatible servo controller.
It develops a continuous standstill torque of 24.0 Nm, supplying steady shaft force without overheating when locked at zero speed. Under rated excitation, the rotor reaches a nominal speed of 1500 rpm, which suits applications that favor high torque at moderate shaft speed. The torque and speed combination makes the motor suitable for axes that need stable holding force and controlled rotational output. Field wiring is made through a single-piece connector, keeping the electrical connection compact at the motor housing. Mechanical centering during mounting is guided by the 110 mm centering pilot, which helps align the motor flange with the machine interface.
Dynamic balance remains within the manufacturer's standard tolerance class, and the rotor uses a plain shaft that extends from the front only. The wiring and feedback ports face the right side of the housing, which supports lateral cable routing in cabinet-based machine layouts. This arrangement also suits installations where rear clearance is limited and cable entry must remain to one side. Frame code 093 and length code D provide the mass and thermal capacity required for the installed blocking brake, which applies 11 Nm to hold stationary loads when power is removed. The brake supports holding functions when the driven load must remain still at rest. The motor also includes a shaft seal to limit lubricant migration toward the encoder chamber. A cast-aluminum housing with the standard finish supports smooth rotation across the working speed range.
Frequently Asked Questions about MDD093D-N-015-N2L-110GR1:
Q: Does the MDD093D-N-015-N2L-110GR1 motor have a holding brake?
A: This model includes a blocking brake that provides a holding torque of 11 Nm for secure braking performance.
Q: What type of feedback does the MDD093D-N-015-N2L-110GR1 motor use?
A: The MDD093D-N-015-N2L-110GR1 motor features a digital servo feedback (DSF) system for precise position monitoring.
Q: What is the continuous torque at standstill for the MDD093D-N-015-N2L-110GR1 motor?
A: The continuous torque at standstill for this model is 24.0 Nm, supporting demanding applications.
Q: How is the MDD093D-N-015-N2L-110GR1 motor electrically connected?
A: The connection type for this motor is a connector and the connection direction is to the right.
Q: What kind of shaft and seal does the MDD093D-N-015-N2L-110GR1 motor have?
A: This motor is equipped with a shaft seal for added protection and has a plain shaft end without a side B shaft end.
