Product Description:

The MDD093D-N-015-N2L-110GR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for use with digital drive controllers in industrial automation systems. As part of the MDD Synchronous Motors series, it converts commanded electrical input into controlled rotary motion for loaders, gantries, and process axes that require closed-loop positioning. The motor is intended for applications where stable torque, repeatable motion, and accurate speed control are needed during continuous machine operation. This arrangement lets the connected controller regulate position and speed with predictable response during indexing and synchronized motion tasks.

The motor’s nominal speed is 1500 rpm, which suits axes that need steady rotation without very high shaft speed. A continuous standstill torque of 24.0 Nm allows the axis to hold load at zero speed while current remains under control. Accurate alignment is supported by a 110 mm centering diameter, and the power and feedback cables exit on the right side for straightforward routing in stacked machine layouts. The motor is supplied without a blocking brake, so any holding function during power-off conditions must come from external hardware or controlled drive torque.

Electrical connection is made through a single connector that carries motor power and feedback signals in one interface, which helps reduce separate terminal points. Position data are provided through Digital servo feedback (DSF), allowing the controller to process commutation and position information with high resolution. The output uses a plain shaft and includes a shaft seal to help limit the movement of contaminants or lubricant at the shaft opening. The motor also uses size 093 with a D length and a standard housing, which keeps the mounting format consistent for machinery built around this frame.