Product Description:

The MDD093D-N-015-N2L-110GL2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for digital drive controllers, it converts commanded current into precise rotary motion for production lines, material-handling stages, and other closed-loop automation tasks. This unit uses motor length code D within the 093 frame, and its standard housing suits cabinet installation or direct machine mounting. The design is intended for applications that need controlled acceleration, steady speed regulation, and repeatable positioning during continuous industrial operation.

The motor has a nominal speed of 1500 rpm, which is the reference velocity it can maintain under rated load. At standstill, it delivers a continuous torque of 24.0 Nm, allowing the axis to resist static process forces without overheating. A blocking brake at the non-drive end provides 22 Nm of holding torque to secure vertical or suspended loads when power is removed. Position and velocity information are supplied through digital servo feedback, allowing the drive to close high-resolution control loops without an external encoder. A centering diameter of 110 mm aligns the motor flange with the driven machine for accurate mechanical fit.

Electrical power and feedback connectors are oriented to the left side of the stator, which can simplify cable routing where space is limited beside the motor body. The rotor uses standard balancing so it can be coupled to common driven elements without additional trim work. The output is a plain shaft, and the standard single-shaft arrangement omits an additional shaft end on side B. The motor is supplied with a shaft seal to help limit contaminant entry at the coupling area. Frame size 093 places the motor within a common dimensional format for this product family.