Product Description:

The MDD093D-N-015-N2L-110GL0 synchronous motor is a servo unit produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where commanded current is converted into controlled rotary motion for positioning and velocity-regulated axes in automated machinery. The compact housing helps the motor fit into tightly arranged machine layouts, and the closed-loop design supports stable motion during repetitive production cycles. This makes the unit suitable for packaging equipment, transfer systems, and other industrial axes that require accurate response without a large installation footprint.

At stall, the rotor can deliver a continuous torque of 24.0 Nm, allowing the axis to hold or move substantial loads while managing heat during sustained operation. Once energized, it reaches a nominal speed of 1500 rpm, which is suited to applications that rely on dependable low-speed output rather than very high cycling rates. A centering pilot of 110 mm helps align the housing with the machine interface, and cabling enters from the left side through a sealed connector. That connector carries power conductors and digital servo feedback signals, which supports accurate position and speed control while keeping external wiring organized.

The motor uses length code D, providing a longer active stack within the 093 frame size to support the stated performance. The output is a plain shaft, and the front end is sealed to help protect the bearings during normal machine operation. Internal labyrinths are paired with a shaft seal to reduce the entry of oil or coolant when the motor is installed horizontally or vertically. The unit is supplied without a blocking brake, so any holding function at standstill must come from drive torque or external mechanical restraint. This arrangement suits axes that rely on the drive or external mechanics for load holding.