Product Description:

The MDD093D-N-015-N2L-110GB2 is a synchronous servomotor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it uses the size 093 frame with length code D and comes in the standard housing with standard balancing grade. A plain single-ended shaft without a side-B extension helps reduce axial space in packaging, material-handling, and general motion systems. This layout suits installations where compact motor length is important around brackets, guards, and adjacent machine components.

The motor delivers a continuous standstill torque of 24.0 Nm, which is the torque it can hold at zero speed while energized. Its nominal speed of 1500 rpm suits axes that need steady rotational speed during indexing and positioning tasks. Accurate seating is supported by the 110 mm centering diameter, which helps keep the motor aligned with the machine interface. Power and feedback conductors exit on side B, which can simplify cable routing when neighboring components are arranged on the same face. A circular connector is used for termination, and its keyed body helps maintain shielding continuity across the motor case.

An integrated blocking brake supplies 22 Nm of holding torque to secure vertical or inertia-loaded axes when power is removed. Motion is monitored through digital servo feedback, which sends position data to the drive for closed-loop control. Output torque is transmitted through a plain shaft fitted with a shaft seal, which helps retain lubricant and resist contaminants near the bearing area. This arrangement supports cleaner operation in dusty processing areas and reduces the chance of contamination reaching internal components. The standard shaft-end orientation also leaves clearance for cable routing and service access in compact machine frames.