Product Description:

The MDD093D-N-015-N2L-110GB0 synchronous servo motor is manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Intended for coupling with digital drive controllers, it converts commanded current into regulated mechanical motion for packaging, material-handling, and other automated axes that demand coordinated torque delivery. Its synchronous design supports precise speed regulation and repeatable positioning in closed-loop industrial motion systems.

Its centering pilot measures 110 mm, providing a stable fit against the mounting surface and maintaining concentric alignment with the driven load. Power and feedback cabling exit on side B, which can simplify routing where the flange faces forward. The motor uses a single plug-in connector interface, enabling quick disconnection without disturbing terminations. At standstill, it delivers 24.0 Nm of continuous torque, keeping heavy inertial loads under closed-loop control without overheating. When commanded to run, the rotor reaches a nominal speed of 1500 rpm, matching equipment that requires low-speed, high-torque operation. Because the motor is supplied without a holding brake, external locking or drive torque must secure vertical axes during power-off conditions.

Position feedback to the drive controller is provided by digital servo feedback (DSF), enabling high-resolution velocity and position loops without an external encoder. The motor has motor length code D within the 093 frame, and standard balancing helps keep residual vibration low during direct coupling to gearboxes or other driven elements. The output uses a plain shaft that works with clamping hubs, and a shaft seal is fitted to help block contaminants. The housing remains standard, and the opposite shaft end is omitted to keep the package compact for enclosed machine installations.