Product Description:

The MDD093D-N-015-N2L-110GA0 synchronous motor is built by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Designed as a motor for digital drive controllers, it supplies controlled rotary motion for indexing tables, packaging axes, and other precise automation roles. With the 093 frame size and D length stack, the unit fits mid-range power slots while maintaining compatibility with modular drive assemblies. Its synchronous design also suits repeatable start-stop motion in automated equipment that depends on accurate positioning.

At standstill, the rotor can deliver a continuous torque of 24.0 Nm, allowing the axis to hold static loads without overheating. During operation, the rated mechanical speed reaches 1500 rpm, which suits applications that favor higher torque density over top speed. The flange features a centering bore of 110 mm for repeatable alignment with gearboxes or couplings. Feedback is obtained through Digital servo feedback (DSF), so the drive receives rotor position and speed data. Power and signal connectors exit on the left when viewed from the drive shaft because the hardware is arranged on Side A. The feedback channel also helps the controller correct motion under changing load conditions during normal operation.

The stator housing uses the standard exterior and integrates a Connector interface that keeps cable routing direct at the motor. The output end is a plain shaft, and the opposite side is closed, so only one transmission element is supported. Internal lip protection keeps lubricant in and contaminants out because the motor is supplied with a shaft seal. In vertical or suspended axes, the design must rely on the drive or an external clamp to hold position, since the unit is provided without a blocking brake. This arrangement supports installations that need a sealed shaft end and a simple motor connection layout.