MDD093C-N-060-N2M-130GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911272811
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
25 Seconds
The Bosch Rexroth Indramat MDD093C-N-060-N2M-130GA1 is a synchronous motor from the MDD Synchronous Motors series and is designed for use with digital drive controllers. It features an integrated multiturn absolute encoder, standard housing, and a plain shaft with shaft seal. The motor has a centering diameter of 130 mm, a nominal speed of 6000 rpm, and includes a blocking brake with a holding torque of 11 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-N-060-N2M-130GA1 is a brushless synchronous motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It serves as the rotary element in motion axes driven by digital drive controllers, converting regulated DC bus power into precise and repeatable shaft rotation for automated assembly cells, packaging lines, and material-handling systems. Its design is intended for use with digital control architecture, and the standard housing supports installation in enclosed machine spaces where accurate motor alignment and stable electrical feedback are important.
Mechanical registration to the mounting plate is achieved through a centering diameter of 130 mm, which helps keep the motor aligned with gearboxes or direct-drive loads. During operation, the rotor can reach a nominal speed of 6000 rpm, allowing high cycle throughput when paired with suitable gearing. A blocking brake rated at 11 Nm keeps the axis stationary during power-off conditions or safety stops. Power and feedback lines leave the motor on Side A, which can simplify cable routing when the drive is mounted on the same side of the machine. Position data is supplied by an integrated multi-turn absolute encoder, and the digital servo feedback format allows accurate transfer of position, speed, and diagnostic data to the controller. The connection uses a keyed circular connector for secure attachment and consistent orientation.
The output end is equipped with a shaft seal to limit lubricant escape and help protect the bearings from airborne contaminants. The motor uses frame size 093 with the longer C length variant, which provides more stator volume than shorter versions in the same series. Rotor balance follows the standard grade, helping the shaft run smoothly when connected to precision couplings and other drive components.
Frequently Asked Questions about MDD093C-N-060-N2M-130GA1:
Q: What type of encoder is included with the MDD093C-N-060-N2M-130GA1?
A: The MDD093C-N-060-N2M-130GA1 motor features an integrated multiturn absolute encoder.
Q: What is the holding brake torque of the MDD093C-N-060-N2M-130GA1?
A: This motor provides a holding brake torque of 11 Nm for reliable load retention.
Q: What kind of shaft configuration does the MDD093C-N-060-N2M-130GA1 motor have?
A: The shaft is a plain type and comes with a shaft seal for added protection.
Q: What is the nominal speed of the MDD093C-N-060-N2M-130GA1?
A: The nominal speed of this model is 6000 min⁻¹.
Q: Which motor feedback system does the MDD093C-N-060-N2M-130GA1 utilize?
A: Digital servo feedback (DSF) is used for motor feedback in this motor.
