Product Description:

The MDD093C-N-060-N2M-110PB0 is a synchronous AC servo motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It acts as the rotary actuator in drive systems that rely on digital controllers, translating commanded current into torque for positioning or velocity regulation on automated axes such as gantries, tool heads, or transfer stations. In servo applications, this allows the motor to respond quickly to controller commands while supporting smooth acceleration, stable low-speed operation, and repeatable motion on coordinated machine axes.

This model is optimized for applications that require high speed, and its nominal rotor velocity reaches 6000 rpm, allowing short cycle times on rapid-motion machines. Accurate mechanical alignment is supported by a centering pilot of 110 mm, which provides a repeatable mounting reference on the machine frame. Power and feedback conductors exit on Side B, which can simplify cable routing when the motor is installed near slides, guards, or other moving machine parts. For closed-loop control, the motor transmits position data through digital servo feedback (DSF), enabling the drive to correct errors in real time and maintain commanded trajectories under changing loads. This feedback arrangement helps the controller keep axis motion stable during acceleration, deceleration, and direction changes.

Rotor position is measured by an integrated multi-turn absolute encoder, so the axis can retain position information after power loss. The unit is supplied without a blocking brake, so any holding function at standstill must come from the drive or from external mechanical restraint. Torque is delivered through a keyed shaft, and the keyway helps prevent slippage during reversing motion while the shaft seal helps protect the bearing area from dust or coolant splash. The motor uses frame size 093 with length code C, giving a mid-length housing within this frame range.