Product Description:

The MDD093C-N-060-N2L-110PL0 is a synchronous servo motor built by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. It is engineered to work with digital drive controllers where closed-loop torque and position regulation are required in industrial automation cells, material handling axes, and packaging machinery. The motor supplies rotary motion while transmitting high-speed feedback to the controller so that velocity and position can be corrected in real time. This operating role makes it suitable for axes that need fast response and repeatable motion during continuous production cycles.

In continuous operation, the rotor can reach a nominal speed of 6000 rpm, allowing fast indexing or spindle duties in compact frames. Position concentricity on the mounting face is aided by the centering pilot of 110 mm, which helps reduce misalignment when the motor is bolted to a gearbox or machine plate. Motion information is returned through digital servo feedback (DSF), permitting the drive to calculate the exact rotor angle without analog conversion delays. The output shaft is machined with a keyway, a simple mechanical feature that helps pulleys or couplings resist slip under cyclic torque. Because the unit is supplied without a blocking brake, the machine must use an external holding device if the axis needs to remain fixed when power is off. This combination supports quick response during acceleration, deceleration, and position correction.

The motor uses the C length class, which provides a taller stack than shorter versions in the same frame. Power and feedback conductors exit on the left side, marked as Left, which can shorten cable runs in multi-axis racks. Quick connection is achieved through a sealed connector rather than fixed leads, which helps keep cable routing orderly where several motors are mounted close together. The unit also has a built-in shaft seal, so lubricants or coolants are less likely to migrate along the shaft into the stator cavity. Standard dynamic balancing of the rotor helps minimize residual vibration, and the standard housing design maintains compatibility with common mounting hardware without requiring special adapters.